603-894-6865
Build My RFQ
Menu
Products
Photodiodes
Germanium Photodiodes
High Speed InGaAs Photodiodes
Large Area InGaAs Photodiodes
Extended InGaAs Photodiodes
Avalanche Photodiodes
InGaAs APDs
Position Sensing
Quadrant Photodiodes
Tetralateral Position Sensors
Specialty Products
Low Polarization-Dependent-Loss InGaAs Photodiodes
Multi-Element Arrays
Two-Color Detectors
Available Features
Mounting Configurations
Fiber Coupling
Windows and Lenses
Filters and Coatings
Thermoelectric Cooling
Technical Info
Careers
About Us
Our Company
Contact Information
Trade Shows
Search
Contact
GPD Optoelectronics Corp.
7 Manor Parkway, Salem, New Hampshire 03079 USA
Tel: 603.894.6865
Fax: 603.894.6866
Product and Technical Inquiries:
[email protected]
Inquiries for Open Positions at GPD:
[email protected]
1
2
Contact Information
Name (required):
*
Email (required):
*
Company:
*
Phone:
GPD Part Number
Additional Comments:
Technical Specifications
1. What's your wavelength?
What's your wavelength Max
What's your wavelength ? Comment
2. Detector Geometry:
Select Type
Single Element
Quad
Linear Array
3. Detector Size:
Select Size
N/A
60um
75um
100um
300um
500um
1mm
1.5mm
2mm
3mm
5mm
1cm
Other
4. Detector Material:
Select Materials
Ge (800-1800nm)
InGaAs (800-1700nm)
InGaAs APD (800-1700nm)
Extended wavelength InGaAs (up to 2.6 µm)
Extended Wavelength InGaAs:
Select Cutoff Wavelength
N/A
1.9um
2.05um
2.2um
2.6um
Two Color:
Select Type
N/A
Si/Ge
Si/InGaAs
InGaAs/InGaAs
5. Frequency Requirements:
Select Type
DC to 1 Mhz
2 Mhz to 2 Ghz
>2 Ghz
6. Sensitivity Requirements:
Select Type
N/A
mW
uW
nW
pW
7. Packaging:
Select Type
TO-5
TO-8
TO-9
TO-18
TO-46
Ceramic Carrier
SMT
Other
8. Fiber Pigtailing Requirements:
Mode
Select Type
Single Mode
Multi-Mode
Fiber Type
Select Type
Bare (250um)
Buffered (900um)
Jacketed (3mm)
Connector Type
Select Type
SC
FC
ST
SMA
Polish Type
Select Type
PC- 30 dB
UPC- 50 dB
APC- 65 dB
9. Thermoelectric Coolers:
Select Type
One Stage
Two Stage
10. Initial and Yearly Requirement:
Additional Comments:
CAPTCHA
Phone
This field is for validation purposes and should be left unchanged.
